公司动态 当前位置:首页>公司动态>公司动态

不锈钢铸件表面的清理分为干

网址:www.ldgcasting.com  2022-08-03  作者:admin    阅读:

不锈钢铸件表面的清理分为干、湿两大类,干类清理法主要是抛丸处理,湿类清理法主要有点解液压清砂、水清砂等,大家介绍一下干类和湿类这两大不锈钢铸件表面清的方法供大家参考借鉴。
The surface cleaning of stainless steel castings can be divided into two categories: dry and wet. The dry cleaning method is mainly shot blasting, and the wet cleaning method mainly includes hydraulic sand cleaning and water sand cleaning.will introduce the surface cleaning methods of dry and wet stainless steel castings for your reference.
干类清理法就是以抛丸处理为主的摩擦处理方框格护坡模具 箱体护坡模具 华尔街铜牛 电阻柜 接地电阻柜 电缆保护接地箱 隔离墩模具 化粪池模具式对不锈钢铸件表面进行清理,抛丸处理简单的说就是以压缩空气为动力,让弹丸以一定的速度喷射到不锈钢铸件的表面,清除表面的沾砂和氧化铁皮等,但是这种摩擦清理方法由于效率低,清理不均匀、效果差等原因,已经被众被造厂所采用,已经几乎被淘汰掉。
Dry cleaning method is a friction treatment method mainly based on shot blasting to clean the surface of stainless steel castings. Shot blasting treatment is simply to use compressed air as power to spray bullets onto the surface of stainless steel castings at a certain speed to remove sand and iron oxide scale on the surface. However, this friction cleaning method has been adopted by many manufacturers due to low efficiency, uneven cleaning and poor effect, Has been almost eliminated

返回新闻